Ecc Stainless Steel Sea Water Horizontal End Suction Centrifugal Pump

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: ECC
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Material: Stainless Steel
• Structure: Single-stage Pump
• Assembly: Pipeline Pump
• Power: Electric
• Start Up: Electric Pump
• Type: Blade Pump
• Application: Chemical Pump
• Industry: Mechanical Pump
• Media: Sea Water Pump
• Performance: No Leakage Pump
• Theory: Centrifugal Pump
• Transport Package: Wooden Box
• Specification: 28kg
• Trademark: EDWIN
• Origin: China

Product Description

Product Description

Description :
The EISO Stainless Steel IS02858/5199 End Suction Back Pull-Out Centrifugal Pump is a specialized type of centrifugal pump commonly used in industrial, water, and chemical processing applications. This model is designed with specific standards (IS02858/5199), indicating its high quality and adherence to international performance and material standards.



Applications :
Water Supply Systems
Fire Fighting Systems
Pressure Boosting
General Transport for Industrial Processes
Heating Systems for Commercial District Heating
Cooling Plants for Industrial Processing and Air-Condutioning units
 

Components and materials

Components and Material :

Components	Materials
Pump body	Stainless steel 304/316/316L/2205/2507
Impeller	Stainless steel 304/316/316L/2205/2507
Shaft	Stainless steel
Shaft seal	Mechanical Seal
Bearing lubrication	Grease Life,Grease, Oil lubrication
Bearing Brand	NTN

Impeller/Shaft connection and seal
The impeller and shaft are fitted with taper,which increase the strength of the shaft
Impeller/ Casing
Optimized Hydraulic design with impeller diameter up to 547mm,ECC pumps have wider performance coverage than EN 25199/22858
Shaft seal
Single,Double mechanical seal,Cartridge mechanicalseal,Gland packing are available
Axial Force Balance
The axial force are mostly balance by the front/rear wearingrings and balanceing holes in impeller design, The residual axial force are balanced by the back to back arranged contactball bearings at the drive end.
Flange
Flange dimensions comply to lSO 7005-1:1992 PN16 Mpa as standard,other flange (including ANSl flange) are also available by request
Heavy Duty Bearings
Cylindrical roller bearing at the impeller end, two of angularcontact ball bearing (back to back arrangment) at the drive end.Design bearing life up to 25000 hours.

 

Section Drawing :

Optional :

NO	Part Name
1	lmpeller Nut
2	Impeller Washer
3	Woodruff key
4	Impeller
5	Pump Casing
6.1	Casing Cover(Single/Double mech seal)
6.2	Casing Cover(Packing seal)
6.3	Casing Cover(Cartridge Seal)
6.4	Casing Cover(Dynamic seal)
7.1	Bearing Housing (Standard)
7.2	Bearing Housing(Heavy duty)
8.1/8.2	Deep groove ball bearing
8.3	Cylindrical roller bearing
8.4	Angular contact ball bearing
9	Nameplate
10.1	Shaft(standard)
10.2	Shaft(Heavy)
11.1-11.5	Oil Seal
12.1/12.2	Key
13.1/13.2	Support Foot
14.1-14.3	Gasket Paper
15.1-15.3	Bearing Cover
16.1-16.3	O-Ring
17.1/17.2	Wear Ring
18.1/18.2	Drain plug
19	Oil hole cover
20	Tab washer
21	Nut
22	Oil indicator
23.1/23.2	Seal Gland
24	Single Mechanical seal
25.1	Shaft Sleeve (Single mech.)
25.2	Shaft Sleeve(Double Mech.)
25.3	Shaft Sleeve(Packing)
26	Double mechanical sea
27	Packing Gland
28	Gland Packing
29	Lantern Ring
30	Cartridge Seal
31	Seal Plate
32	Vice impeller

Performance curves

 

 

Product Parameters

Installation Dimension :

Flange Connecting Dimension( IS0 2084,PN16)

 

DN	Ød	Øk	ØD	n	ØS
32	76	100	140	4	18
40	84	110	150	4	18
50	99	125	165	4	18
65	118	145	185	4	18
80	132	160	200	8	18
100	156	180	220	8	18
125	184	210	250	8	18
150	211	240	285	8	22
200	266	295	340	12	22
250	319	355	405	12	26
300	370	410	460	12	26
350	429	470	520	16	26

Certifications

Product Line

Exhibition