Product Description
Product Highlights
- Technical Innovation:
- Delayed start: After the water is connected to the power supply, it starts after a 3-second delay to protect the motor and personal safety.
- Water shortage protection: After 3 minutes of no water use, the water automatically cuts off power. For tap water pressurization, it has water shortage protection and automatically starts when there is water.
- Jam protection: If the water pump is shut down and not used for a long time, it will automatically run for 5 seconds every 72 hours to remove dirt and effectively prevent the water pump from getting stuck.
- Flow switch: The flexible joint design makes installation and removal simple and convenient.
- Motor Features:
- All copper wire for greater durability. High-efficiency C&U bearings. Cold-rolled 600 steel sheets for high efficiency and energy savings.
- Single-phase motor with wide voltage design and a built-in overheat protection device. Protection level: IP44. Insulation level: F. Maximum ambient temperature: +40°C.
- Pump Body and Components:
- Cast iron pump body and front cover with special anti-rust treatment.
- Copper impeller and stainless steel insert. After a long period of shutdown, there is no impeller jam when restarting.
- AISI304 stainless steel welded shaft. The water passage parts never rust.
- Maximum liquid temperature: +90°C. Maximum suction height: +9 m.
Application
This pump is suitable for transferring clean water or other liquids with physical and chemical properties similar to water. Due to its compactness and reliability, it is easy to use and recommended for domestic and civil applications. For example, it can be used for distributing water in consumption with small pressure sets, irrigating gardens and allotments, and drawing water from tanks. It is also suitable for situations where air or water may be present in the liquid to be pumped.
The pump comes with a flap-check valve. It should be installed in an enclosed environment or at least sheltered from inclement weather. This pump is widely used in living water supply, water tower water supply, automatic irrigation systems, well water lifting, and various corollary equipments.
Components and materials
| Materials Table |
| NO. |
Part |
Material |
| 1 |
Pump Body |
HT200 |
| 2 |
Pressure Sensor |
|
| 3 |
Tank |
|
| 4 |
Flow Sensor |
|
| 5 |
Mechanical Seal |
Carbon/Ceramic |
| 6 |
Impeller |
Brass |
| 7 |
" O " ring |
|
| 8 |
Base |
|
| 9 |
Terminal Cover |
|
| 10 |
Shaft And Rotor |
|
| 11 |
Support |
HT200 |
| 12 |
Motor Case |
Aluminum |
| 13 |
Fan Cover |
|
Product Parameters
| Model |
Power |
Inletx Outlet |
Max. Flow |
Max. Head |
Max. Suction |
| KW |
HP |
(L/min) |
(m) |
(m) |
| ETPS-370AZ |
0.37 |
0.50 |
1"x1" |
40 |
35 |
9 |
| ETPS-550AZ |
0.55 |
0.75 |
1"x1" |
50 |
40 |
9 |
| ETPS-750AZ |
0.75 |
1.0 |
1"x1" |
55 |
45 |
9 |
| ETPS-900AZ |
0.90 |
1.2 |
1"x1" |
60 |
50 |
9 |
FAQ:
Q: What is the delivery time?
A:The sample can be sent to customer within 10-15 days.
The batch order can be shipped within 35 days after receiving deposit payment.
Q: Is it all right to make customer's own brand name?
A: Can make OEM if order quantity reached 1000pcs totally.
Q: What is your payment term?
A: 30% in advance, 70% balance the B/L or T/T.
Q: What is the warranty of the product?
A: We offer 1 year product life guarantee and a generous 1 year warranty on all purchases that begin with the BL.
Q: Packing method?
A: Craft box or color box if quantity reaches to 1000pcs.
Q: What information shall I provide you when I need your offer?
A: Normally, we need customer to supply the pump flow, total head, pump material (copper wire or aluminum wire? Stator length), voltage, frequency, etc, so we can quote exactly what customer need.
Q: Can you accept customized products?
A: Yes we accept your specific order if you could provide us with your requirements.
Q: Will you supply any spare parts with the pumps?
A: Yes, we can supply for example: tank, flexible hose, pressure switch, pressure gauge, brass connector, cable, etc.
Q: Is there any leakage problem of this pump?
A: Some factory may have such problem, but we solved it very well, by using good material of pump casing, O-ring, and they fit each other perfect. We use 8 screw on the pump head while others may use only 6 screw to save cost. We test 100% and long time for the pump head part, to make sure there is no leakage problem.
Q: How many pcs can load into one 20ft container
A: 1200pcs
Q: Do you supply sample?
A: We can supply sample, but customer have to pay for the sample fee.
Q: Where did you export to?
A: We export to more than 50 countries, for example, Israel, South Africa, Germany, Poland, Spain, Vietnam, Malaysia, Russia, Thailand, Mexico, Brazil, Chile, etc.
Q: Is it all right to make customer's own brand name?
A: Can make OEM if order quantity reached 1000pcs totally
Q: Can I get any discount if order EDWIN PUMP brand?
A: At the moment, customer can get lower offer if they purchase EDWIN PUMP brand but still get same good quality pumps as always.
Q: Can I order some pressure tank, flexible hose, 5-way connector, pressure gauge, pressure controller and assemble with the pump?
A: Yes, many customer purchase by this way, and we can make very good job to have this booster system to be assembled without any problem.
Q: Can the pump be made by customized voltage and frequency
A: Yes, 220-240V, 110V, 50Hz, 60Hz, we can make according to customer's need
){kind=link}